2
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
Die Seite wurde neu angelegt: „{{Maschine |Bereich=Robotik |Hersteller=KUKA AG |Produktbezeichnung=KR 5-2 arc HW |Herstellerseite=https://www.kuka.com/ |Anschaffung=28.02.2019 }} ==Allgemein…“
{{Maschine
|Bereich=Robotik
|Hersteller=KUKA AG
|Produktbezeichnung=KR 5-2 arc HW
|Herstellerseite=https://www.kuka.com/
|Anschaffung=28.02.2019
}}
==Allgemeine Informationen==
The KR 5-2 is an industrial robot with a hollow shaft whist in axes 5 and 6.
It is usually used for welding and applying adhesive and sealing.
==technische Details==
Hollow-shaft wrist
The robot is fitted with a 2-axis hollow-shaft wrist. The hollow-shaft wrist contains axes 5 and 6. The motors of axes 5 and 6 are incorporated in this assembly. The axes are driven via toothed belts and gear units. The design enables
the fluid supply to be routed directly through the center of axis 6 to the application.
For attaching end effectors (tools), the in-line wrist has a mounting flange.
Arm
The arm is the link between the hollow-shaft wrist and the link arm. It houses
the motors of the wrist axes A 3 and A 4. The arm is driven by the motor of axis
3. The maximum permissible swivel angle is mechanically limited by a stop for
each direction, plus and minus. The associated buffers are attached to the link
arm. The entire drive unit of axis 4 is also integrated inside the arm. In addition,
the cable harness for the wrist axes A 5 and A 6 is installed under a cover.
Fastening facilities are provided for the welding application equipment on the
rear of the arm. The fluid supply to the tool is routed axially through the arm.
Link arm
The link arm is the assembly located between the arm and the rotating column.
It consists of the link arm body and the buffers.
Rotating column
The rotating column houses the motors of axes 1 and 2. The rotational motion
of axis 1 is performed by the rotating column. This is screwed to the base
frame via the gear unit of axis 1 and is driven by a motor in the rotating column.
The link arm is also mounted in the rotating column.
Base Frame
The base frame is the base of the robot. It is screwed to the mounting base.
The flexible tube for the electrical installations is fastened to the base frame.
Also located on the base frame is the control cable junction box.
Electrical installations
The electrical installations include all the motor and control cables for the motors of axes 1 to 6. All connections are implemented as connectors in order to
enable the motors to be exchanged quickly and reliably. The electrical installations also include the RDC box and the motor terminal box, both of which are
mounted on the robot base frame. The connecting cables from the robot controller are connected to these junction boxes by means of connectors. The
electrical installations also include a protective circuit.
For the supply to the wrist axis drives, an additional cable harness is integrated
into the arm, which ensures that the cables are guided without kinking throughout the motion range of axis 4.
For detailed information, please have a look into the pdf file linked below:
http://supportwop.com/IntegrationRobot/content/2-Robots/Petites_charges(5-16kg)/KR_5_arc/English_Manual_KR_5_arc_HW_en.pdf
==FAQ==
|Bereich=Robotik
|Hersteller=KUKA AG
|Produktbezeichnung=KR 5-2 arc HW
|Herstellerseite=https://www.kuka.com/
|Anschaffung=28.02.2019
}}
==Allgemeine Informationen==
The KR 5-2 is an industrial robot with a hollow shaft whist in axes 5 and 6.
It is usually used for welding and applying adhesive and sealing.
==technische Details==
Hollow-shaft wrist
The robot is fitted with a 2-axis hollow-shaft wrist. The hollow-shaft wrist contains axes 5 and 6. The motors of axes 5 and 6 are incorporated in this assembly. The axes are driven via toothed belts and gear units. The design enables
the fluid supply to be routed directly through the center of axis 6 to the application.
For attaching end effectors (tools), the in-line wrist has a mounting flange.
Arm
The arm is the link between the hollow-shaft wrist and the link arm. It houses
the motors of the wrist axes A 3 and A 4. The arm is driven by the motor of axis
3. The maximum permissible swivel angle is mechanically limited by a stop for
each direction, plus and minus. The associated buffers are attached to the link
arm. The entire drive unit of axis 4 is also integrated inside the arm. In addition,
the cable harness for the wrist axes A 5 and A 6 is installed under a cover.
Fastening facilities are provided for the welding application equipment on the
rear of the arm. The fluid supply to the tool is routed axially through the arm.
Link arm
The link arm is the assembly located between the arm and the rotating column.
It consists of the link arm body and the buffers.
Rotating column
The rotating column houses the motors of axes 1 and 2. The rotational motion
of axis 1 is performed by the rotating column. This is screwed to the base
frame via the gear unit of axis 1 and is driven by a motor in the rotating column.
The link arm is also mounted in the rotating column.
Base Frame
The base frame is the base of the robot. It is screwed to the mounting base.
The flexible tube for the electrical installations is fastened to the base frame.
Also located on the base frame is the control cable junction box.
Electrical installations
The electrical installations include all the motor and control cables for the motors of axes 1 to 6. All connections are implemented as connectors in order to
enable the motors to be exchanged quickly and reliably. The electrical installations also include the RDC box and the motor terminal box, both of which are
mounted on the robot base frame. The connecting cables from the robot controller are connected to these junction boxes by means of connectors. The
electrical installations also include a protective circuit.
For the supply to the wrist axis drives, an additional cable harness is integrated
into the arm, which ensures that the cables are guided without kinking throughout the motion range of axis 4.
For detailed information, please have a look into the pdf file linked below:
http://supportwop.com/IntegrationRobot/content/2-Robots/Petites_charges(5-16kg)/KR_5_arc/English_Manual_KR_5_arc_HW_en.pdf
==FAQ==
